Select TVC1

SELECT TVC1 TRANSFORMER VOLUME CONTROL LINE LEVEL PRE-AMPLIFIER WITH GAIN.

Select TVC1 frontAudion Select TVC1 transformer based volume control Passive Line level  pre-amplifier is hand built with quality compononents. The chassis is black powder coated aluminum as is the base. The top plate is mirror finished stainless steel.

The Audion Select TVC1 passive line level pre-amplifier is a passive transformer based device with gain. Built with 5 line level inputs switched from the front panel, 2 line outputs and a direct un-switched unattenuated tape output. It is hard wired with a Seidan 23 way switch fitted and with a ground loop lift switch designed to stop any ground loops.. Being a passive pre-amplifier it will not add hum or tube noise to your current equipment. It also has a switch on the rear to offer an additional 6db of gain, effectively “A wire with gain”. Continue reading

Select MC1

 

SELECT MC1 MOVING COIL STEP UP  TRANSFORMER.

Select MC1 frontAudion Select MC1 moving coil step up transformer stage is hand built with very high quality compononents. The chassis is black powder coated aluminum as is the base. The top plate is mirror finished stainless steel designed to match our Premier line of pre-amp phono stages.

The Audion Select MC1 moving coil step up transformer has 2 sets of winding ratios to cover about 90% of moving coil cartridges on today’s market. With 1:10 ratio designed for 100 ohm cartridges and 1:20 ratio for 25 ohm cartridges. Built with 2 MC level inputs switched from the rear panel for 25 or 100 ohm and 2 outputs at 47K MM level designed to feed directly to an MM RIAA phono stage. Also fitted and with a ground loop lift switch designed to stop any ground loops.. Being a passive step up transformer it will not add hum or tube noise to your current equipment. Continue reading